#include <avr/interrupt.h>
#include <avr/sleep.h>
#include <util/delay.h>
+#include <stdlib.h> // for NULL
#include "lights.h"
+#define WAKEUP_LIMIT 5 // times 100 ms
static uint16_t button_start[N_BUTTONS];
-static unsigned char button_pressed[N_BUTTONS];
-static unsigned char just_waked_up;
+static unsigned char prev_pin;
static unsigned char user_params[MAX_USER_PARAMS] = { 0, 0, 0 };
static unsigned char user_params_max[MAX_USER_PARAMS] = { 3, 2, 2 };
static uint16_t user_params_starttime;
-static void do_sleep();
+static void inline set_status_led(unsigned char n, pattern_t *pattern)
+{
+ led_set_pattern(n + N_PWMLEDS, pattern);
+}
-static void toggle_bright_mode()
+unsigned char buttons_setup_in_progress()
{
- // TODO
+ if (user_params_state // setup in progress ...
+ // or at least one button is pressed:
+ || !(prev_pin & _BV(PA3))
+ || !(prev_pin & _BV(PA4)))
+ return 1;
+ return 0;
}
-static void set_panic_mode()
+pattern_t *buttons_setup_status0_pattern_select()
{
- // TODO
+ if (user_params_state) // Setup in progress
+ return number_pattern(user_params_state, 1);
+ else
+ return NULL;
+}
+
+pattern_t *buttons_setup_status1_pattern_select()
+{
+ if (user_params_state) // Setup in progress
+ return number_pattern(
+ 1 + user_params[user_params_state-1],
+ 1
+ );
+ else
+ return NULL;
}
unsigned char get_user_param(unsigned char param)
if (user_params_state == 0) {
if (button == 0)
- toggle_bright_mode();
+ toggle_dim_mode();
else
set_panic_mode();
return;
if (user_params[param])
user_params[param]--;
else
- user_params[param] = user_params_max[param];
+ user_params[param] = user_params_max[param]-1;
} else {
user_params[param]++;
}
// FIXME: notify somebody about user_params change?
- // set_status_led(2, user_params[param]);
+ set_status_led(1, buttons_setup_status1_pattern_select());
user_params_starttime = jiffies;
}
static inline void long_press(unsigned char button)
{
if (button == 0) {
- do_sleep();
+ power_down();
return;
}
// button 1 - cycle through states
user_params_state++;
- if (user_params_state >= MAX_USER_PARAMS)
+ if (user_params_state > MAX_USER_PARAMS)
user_params_state = 1;
- // set_status_led(1, state);
+ set_status_led(0, buttons_setup_status0_pattern_select());
+ set_status_led(1, buttons_setup_status1_pattern_select());
user_params_starttime = jiffies;
}
void init_buttons()
{
- unsigned char i;
-
- DDRA &= ~(_BV(PA3) | _BV(PA4));
- PORTA |= _BV(PA3) | _BV(PA4);
+ DDRA &= ~(_BV(PA3) | _BV(PA4)); // set as input
+ PORTA |= _BV(PA3) | _BV(PA4); // enable internal pull-ups
- for (i=0; i < N_BUTTONS; i++) {
- button_start[i] = 0;
- button_pressed[i] = 0;
- }
+ GIMSK &= ~(_BV(PCIE0) | _BV(PCIE1)); // disable pin-change IRQs
+ PCMSK0 = 0; // disable pin-change IRQs on all pins of port A
+ PCMSK1 = 0; // disable pin-change IRQs on all pins of port B
- just_waked_up = 1;
+ button_start[0] = 0;
+ button_start[1] = 0;
+ prev_pin = _BV(PA3) | _BV(PA4);
+ user_params_state = 0;
}
-static void do_sleep()
+void susp_buttons()
{
- log_byte(0xb0);
- log_flush();
+ DDRA &= ~(_BV(PA3) | _BV(PA4)); // set as input
+ PORTA |= _BV(PA3) | _BV(PA4); // enable internal pull-ups
- hw_suspend();
- gpio_before_poweroff(); // Set the status LED on again
+ GIMSK &= ~_BV(PCIE0);
+ GIMSK |= _BV(PCIE1);
- while((PINA & _BV(PA3)) == 0)
- ; // wait for button release
+ PCMSK0 = _BV(PCINT3) | _BV(PCINT4);
+ // disable pin-change IRQs on all pins except PA3,PA4
+ PCMSK1 = 0; // disable pin-change IRQs on all pins of port B
+}
- _delay_ms(100);
+static void handle_button(unsigned char button, unsigned char cur,
+ unsigned char prev)
+{
+ // BEWARE: pins are at _zero_ when pressed!
+ if (!cur && prev) { // --- just pressed ---
+ button_start[button] = jiffies;
+ set_status_led(button, NULL);
- susp_gpio(); // disable the status LED
+ } else if (!cur && !prev) { // --- is still pressed ---
+ uint16_t duration = jiffies - button_start[button];
- power_down();
+ if (duration > 160) {
+ set_status_led(button, on1_pattern);
+ // acknowledge long press
+ }
+ } else if (cur && !prev) { // --- just released ---
+ uint16_t duration = jiffies - button_start[button];
+
+ if (duration > 6 && duration < 60) {
+ short_press(button);
+ } else if (duration > 160) {
+ set_status_led(button, NULL);
+ long_press(button);
+ }
+ // ignore other button-press durations
+ }
}
void timer_check_buttons()
{
- unsigned char pin = PINA;
- unsigned char i;
- unsigned char port_states[N_BUTTONS] = {
- pin & _BV(PA3),
- pin & _BV(PA4),
- };
-
- for (i = 0; i < N_BUTTONS; i++) {
- if (!port_states[i]) { // is pressed
- if (i == 0 && just_waked_up)
- continue;
- if (button_pressed[i] == 0) {
- // begin of button press
- button_pressed[i] = 1;
- button_start[i] = jiffies;
-#if 0
- log_byte(0xC0);
- log_word(jiffies);
-#endif
- } else if (button_pressed[i] == 1) {
- // been already pressed
- uint16_t duration = jiffies - button_start[i];
- if (duration > 80) {
- // long button press
- button_pressed[i] = 2;
- long_press(i);
- }
- }
- } else { // is not pressed
- if (i == 0)
- just_waked_up = 0;
- if (button_pressed[i]) { // just depressed
- uint16_t duration = jiffies - button_start[i];
-#if 1
- log_byte(0xC1);
- log_word(duration);
- log_flush();
-#endif
- button_pressed[i] = 0;
- if (duration > 6 && duration < 30)
- short_press(i);
- }
- }
+ unsigned char pin = PINA & (_BV(PA3) | _BV(PA4));
+
+ handle_button(0, pin & _BV(PA3), prev_pin & _BV(PA3));
+ handle_button(1, pin & _BV(PA4), prev_pin & _BV(PA4));
+
+ prev_pin = pin;
+
+ if (user_params_state && jiffies - user_params_starttime > 1000) {
+ user_params_state = 0;
+ set_status_led(0, buttons_setup_status0_pattern_select());
+ set_status_led(1, buttons_setup_status1_pattern_select());
}
}
+unsigned char buttons_wait_for_release()
+{
+ uint16_t wake_count = 0;
+ unsigned char pin;
+
+ do {
+ if (wake_count++ > WAKEUP_LIMIT)
+ gpio_set(0, 1); // inform the user
+
+ _delay_ms(100);
+
+ pin = PINA & (_BV(PA3) | _BV(PA4));
+ } while (!(pin & _BV(PA3)) || !(pin & _BV(PA4)));
+
+ gpio_set(0, 0);
+
+ return wake_count > WAKEUP_LIMIT;
+
+}
+
+ISR(PCINT_vect)
+{
+ // empty - let it wake us from sleep, but do nothing else
+}
+