holder for Papouch Quido

diff --git a/din-quido.scad b/din-quido.scad
new file mode 100644 (file)
index 0000000..bf914d8
--- /dev/null
+++ b/din-quido.scad
@@ -0,0 +1,66 @@
+infty = 300;
+eps = 0.1;
+
+wall = 3;
+
+papouch_h = 123.2 + 0.5;
+w = 20;
+
+module din(height) {
+       assign(
+               din_h = 35,
+               din_thick = 2,
+               din_clip = 4,
+               din_bottom_d = 10,
+               din_bottom_thick = 1.0,
+               din_bottom_hole = 0.7
+       ) {
+               // front part
+               translate([-din_h/2 -wall, 0, 0])
+                       cube([din_h + 2*wall, wall, height]);
+               // top plate
+               translate([din_h/2, 0, 0]) 
+                       cube([wall, 2*wall + din_thick, height]);
+               // behind the top plate
+               translate([din_h/2 - din_clip, wall + din_thick, 0])
+                       cube([din_clip + wall, wall, height]);
+
+               // bottom spring
+               translate([-din_h/2 - din_bottom_d/2, din_bottom_d/2+wall-din_bottom_thick, 0])
+               difference() {
+                       cylinder(r = din_bottom_d/2, h = height, $fn = 32);
+                       translate([0, 0, -eps])
+                               cylinder(r = din_bottom_d/2 - din_bottom_thick,
+                                       h = height+2*eps, $fn = 16);
+                       translate([0, -din_bottom_d/2 + din_bottom_thick, -eps]) 
+                               cube([din_bottom_d, din_bottom_hole, height + 2*eps]);
+               };
+       };
+};
+
+module pcb_end(comp_h, pcb_h, pcb_border, height) {
+       translate([-wall, 0, 0])
+               cube([wall+pcb_border, wall, height]);
+       translate([-wall, wall-eps, 0])
+               cube([wall, pcb_h+eps, height]);
+       intersection() {
+               translate([-wall, 0, 0])
+                       cube([2*wall, wall+pcb_h+5, height]);
+               translate([-3, wall+pcb_h + 5/2, 0])
+                       cylinder(r=4, h=height);
+       }
+}
+module papouch(len, height, clip) {
+       // back
+       translate([-len/2-wall, -wall, 0])
+               cube([len+2*wall, wall+eps, height]);
+       for (x = [-1, 1]) scale([x, 1, 1])
+               translate([-len/2, 0, 0])
+                       pcb_end(3, 1.6, 5, height);
+};
+
+       
+rotate([0, 0, 180]) din(w);
+papouch(papouch_h, w, 5.5);
+
+