case.scad: modified lid clips

diff --git a/case.scad b/case.scad
index a5d6347fb218efe465d02563fd1e8c3a5407d9ff..c1df55c6f9c6be01c7f651b5d29dd6eb4f8203bd 100644 (file)
--- a/case.scad
+++ b/case.scad
@@ -6,10 +6,10 @@ infty = 300;
 wall = 1.5; // generic wall thickness
 
 // 18650 is ~18mm diameter, ~65mm length, 
-batt_diam = 18 + 1.0;
+batt_diam = 18 + 0.8;
 batt_len = 65 + 2.0;
 
-cable_sep = 2;
+cable_sep = 1.5;
 
 // front flat area
 front_flat_len = batt_len + 4*wall + 2*cable_sep;
@@ -170,68 +170,94 @@ module case() {
                                cylinder(r = wire_thick/2, h = batt_len + 2*wall + 2*eps, $fn=6);
                // hole behind the battery contacts
                for(x=[1, -1])
-               scale([x, 1, 1]) translate([batt_len/2+wall, 0, 0]) hull() {
+               scale([x, 1, 1]) translate([batt_len/2+wall+cable_sep, 0, 0]) hull() {
                        translate([0, -batt_diam/2, 0])
-                               cube([wall + cable_sep + eps, batt_diam, infty]);
+                               cube([wall + eps, batt_diam, infty]);
                        rotate([0, 90, 0])
-                               cylinder(r = batt_diam/2, h = wall+cable_sep+eps);
+                               cylinder(r = batt_diam/2, h = wall+eps);
                        translate([0, batt_diam/2 - pcb_width,
                                -batt_diam/2-pcb_comp_h-pcb_thick])
-                               cube([wall + cable_sep + eps, pcb_width, eps]);
-                       translate([cable_sep, batt_diam/2 - pcb_width + wall,
-                               -batt_diam/2-pcb_comp_h-pcb_thick-wall])
-                               cube([wall + eps, pcb_width-2*wall, eps]);
+                               cube([wall + eps, pcb_width, eps]);
+                       translate([0, batt_diam/2 - pcb_width + 0.5*wall,
+                               -batt_diam/2-2*pcb_comp_h-pcb_thick])
+                               cube([wall + eps, pcb_width-0.5*wall, eps]);
+               };
+               // inner hole behind the battery contacts
+               for(x=[1, -1])
+               scale([x, 1, 1]) translate([batt_len/2+wall, 0, 0]) hull() {
+                       translate([0, -batt_diam/2+wall, 0])
+                               cube([cable_sep + eps, batt_diam-2*wall, infty]);
+                       rotate([0, 90, 0])
+                               cylinder(r = batt_diam/2-wall, h = cable_sep+eps);
                };
                // cable lead to battery contacts
                for (x=[1, -1]) scale([x, 1, 1])
                        rotate([-140, 0, 0])
-                       translate([batt_len/2+wire_thick/2, 0, batt_diam/2-2.7])
-                               cylinder(r=wire_thick/2, h = 5.4);
+                       translate([batt_len/2-eps, -wire_thick/2, batt_diam/2-2.7])
+                               cube([wall+cable_sep+2*eps, wire_thick, 5.4]);
                
                // mounting holes
                for(x=[-1,1]) scale([x, 1, 1])
                translate([batt_len/2-mounthole_w/2, batt_diam/2+wall+mounthole_h/2, -infty/2])
                        scale([1, mounthole_h/mounthole_w, 1])
                        cylinder(r = mounthole_w/2, h = infty);
+               // grabbing gap
+               for(x=[-1,1]) scale([x, 1, 1])
+               translate([batt_len/2+cable_sep+wall+10, batt_diam/2-pcb_width/2, -batt_diam/2-2*pcb_comp_h-pcb_thick-wall-eps])
+                       cylinder(r1 = 10, r2 = 10 - wall, h = wall + 2*eps);
        };
        // clip barrier
        for (x = [-1, 1]) scale([x, 1, 1]) hull () {
-               translate([batt_len/2+wall-eps, batt_diam/2-pcb_width+wall/2+lid_sep,
+               translate([batt_len/2+wall+cable_sep-eps, batt_diam/2-pcb_width+wall/2+lid_sep,
                        -batt_diam/2-pcb_thick-pcb_comp_h + wall + lid_sep])
                        cube([wall+eps, pcb_width-2*wall-2*lid_sep, wall]);
-               translate([batt_len/2+wall-eps, batt_diam/2-pcb_width+3*wall/2+lid_sep,
+               translate([batt_len/2+wall+cable_sep-eps, batt_diam/2-pcb_width+3*wall/2+lid_sep,
                        -batt_diam/2-pcb_thick-pcb_comp_h + 3*wall + lid_sep])
                        cube([eps, pcb_width-4*wall-2*lid_sep, eps]);
        };
 };
 
 module lid_body() {
-       translate([-batt_len/2 - wall - lid_sep, -batt_diam/2+lid_sep, -batt_diam/2 -wall])
-               cube([batt_len + 2*wall + 2*lid_sep, batt_diam-2*lid_sep, batt_diam/2 - batt_end_h + wall - lid_sep]);
-       translate([-batt_len/2 - 2*wall - cable_sep, -batt_diam/2 - wall,
-               -batt_diam/2-wall])
-               cube([batt_len + 4*wall + 2*cable_sep, batt_diam + 2*wall,
-                       wall + batt_diam/2 - body_top_h - lid_sep]);
+       translate([-batt_len/2 - wall - cable_sep - lid_sep, -batt_diam/2+lid_sep, -batt_diam/2 -wall])
+               cube([batt_len + 2*wall + 2*cable_sep + 2*lid_sep, batt_diam-2*lid_sep, batt_diam/2 - batt_end_h + wall - lid_sep]);
+       hull () {
+               translate([-batt_len/2 - 2*wall - cable_sep,
+                       -batt_diam/2, -batt_diam/2-wall])
+                       cube([batt_len + 4*wall + 2*cable_sep,
+                               batt_diam, eps]);
+               translate([-batt_len/2 - 3*wall - cable_sep,
+                       -batt_diam/2 - wall, -body_top_h-wall/2-lid_sep])
+                       cube([batt_len + 6*wall + 2*cable_sep,
+                               batt_diam + 2*wall, wall/2]);
+       };
        // clip behind the battery contacts
        for(x=[1, -1])
-               scale([x, 1, 1]) translate([batt_len/2+wall+lid_sep, 0, 0]) hull() {
+               scale([x, 1, 1]) translate([batt_len/2+wall+cable_sep+lid_sep, 0, 0]) hull() {
                        translate([0, -batt_diam/2+lid_sep, -batt_diam/2])
-                               cube([wall+cable_sep-lid_sep, batt_diam-2*lid_sep, eps]);
+                               cube([wall-lid_sep, batt_diam-2*lid_sep, eps]);
                        rotate([0, 90, 0])
-                               cylinder(r = batt_diam/2-lid_sep, h = wall+cable_sep-lid_sep);
-                       translate([-clip_pretension, batt_diam/2 - pcb_width+lid_sep,
-                               batt_diam/2+pcb_comp_h+pcb_thick-lid_sep])
-                               cube([wall+cable_sep-lid_sep, pcb_width-2*lid_sep, eps]);
-                       translate([cable_sep+wall/2-clip_pretension, batt_diam/2 - pcb_width + 1.5*wall +lid_sep,
-                               batt_diam/2+pcb_comp_h+pcb_thick+wall/2-lid_sep])
-                               cube([wall/2-lid_sep, pcb_width-2*wall-2*lid_sep, eps]);
-                       // rear cone
-                       translate([cable_sep+wall-lid_sep, 0, -batt_diam/2-wall]) difference() {
-                               scale([0.5, 1, 1])
-                               cylinder(r = batt_diam/2 - lid_sep,  h = eps);
-                               translate([-infty, -infty/2, -infty/2]) cube(infty);
-                       };
+                               cylinder(r = batt_diam/2-lid_sep, h = wall-lid_sep);
+                       translate([-clip_pretension, batt_diam/2 - pcb_width + 0.5*wall + lid_sep,
+                               batt_diam/2+2*pcb_comp_h+pcb_thick-lid_sep])
+                               cube([wall+clip_pretension, pcb_width-0.5*wall-1.5*lid_sep, eps]);
+               };
+       // outer part of the clip behind the battery contacts
+       for (x=[1, -1]) scale([x, 1, 1]) translate([batt_len/2+2*wall+cable_sep+lid_sep, 0, 0]) hull() {
+               translate([0, -batt_diam/2 - wall, -body_top_h-wall/2-lid_sep])
+                       cube([wall-lid_sep, batt_diam + 2*wall, wall/2]);
+               difference() {
+                       scale([0.3, 1, 1])
+                               sphere(batt_diam/2+wall);
+                       translate([-infty/2, -infty/2, -infty-body_top_h-lid_sep+2*wall])
+                               cube(infty);
+                       translate([-infty-clip_pretension, -infty/2, -infty/2])
+                               cube(infty);
                };
+               translate([-clip_pretension,
+                       batt_diam/2 - pcb_width,
+                       batt_diam/2+2*pcb_comp_h+pcb_thick+wall])
+                       cube([wall-lid_sep, pcb_width+wall, eps]);
+       };
 };
 
 module lid() {
@@ -239,6 +265,16 @@ module lid() {
                lid_body();
                translate([-batt_len/2+eps, 0, 0]) rotate([0, 90, 0])
                        cylinder(r=batt_diam/2, h=batt_len-2*eps);
+       // clip barrier
+       for (x = [-1, 1]) scale([x, 1, 1]) hull () {
+               translate([batt_len/2+wall+cable_sep-clip_pretension, batt_diam/2-pcb_width+wall/2,
+                       batt_diam/2+pcb_thick+pcb_comp_h-2*wall])
+                       cube([wall+clip_pretension+eps, pcb_width-2*wall, wall]);
+               translate([batt_len/2+wall+cable_sep-eps, batt_diam/2-pcb_width+wall/2,
+                       batt_diam/2+pcb_thick+pcb_comp_h-4*wall + lid_sep])
+                       cube([eps, pcb_width-2*wall, eps]);
+       };
+/*
                hull() {
                        difference() {
                                translate([-batt_len/2-cable_sep-wall, 0, 0]) rotate([0, 90, 0])
@@ -249,6 +285,7 @@ module lid() {
                        translate([-batt_len/2-cable_sep-wall, batt_diam/2-pcb_width+0.5*wall+0.5*lid_sep, batt_diam/2 + pcb_comp_h+pcb_thick-wall-lid_sep])
                        cube([batt_len + 2*wall + 2* cable_sep, pcb_width-1.5*wall-1.5*lid_sep, eps]);
                };
+*/
        };
 };